Agility AE-16-012D-2-B-C 16 Channel 12V Relay Module
Agility AE-16-012D-2-B-C provides sixteen independently operated relay channels for automation systems using a 12 VDC control supply. Each channel incorporates an Omron G2R Series electromechanical relay with two changeover (DPDT) contact sets, allowing paired switching functions from one coil command. The contacts are specified at 5 A for 250 VAC or 30 VDC under applicable load conditions. Freewheeling diodes help suppress coil turn-off transients, while DIN rail or panel mounting supports installation in control cabinets. This 16 Channel 12V Relay Module is relevant to machines requiring multiple discrete output interfaces. Agility relay board options include other coil-voltage and contact configurations.

| Brand | Agility |
| Product | Relay Board |
| Model Number | AE-16-012D-2-B-C |
Agility AE-16-012D-2-B-C Relay Board â Technical Overview
| Specification | Value |
|---|---|
| Relay Type | Electromechanical Relay |
| Relay Contact Type | Two Change Over (DPDT) |
| Relay Make | Omron G2R Series (Other make available on request) |
| Coil Voltage | 12 VDC |
| Number of Channels | 16 Channel Relay Module |
| Contact Rating | 5A at 30VDC/250VAC |
| Input Interface | PLC / Control signal compatible |
| Mounting Type | DIN Rail / Panel Mount |
| Relay Coil Protection | Freewheeling Diode |
| Isolation | Electrical isolation between control circuit and load circuit |
| Application | PLC interface, automation control panels, machine control systems |
The Agility AE-16-012D-2-B-C relay board provides sixteen independent switching channels for machine control systems requiring multiple relay-operated outputs. Each channel uses an Omron G2R Series relay with two changeover (DPDT) contact sets. Both contact sets operate together when their associated 12 VDC coil is energized. This arrangement allows one control command to switch a field circuit and an associated auxiliary indication without requiring separate relay coils. The board therefore provides sixteen independently controlled channels and thirty-two mechanically linked contact poles.
The 12 VDC coil supply must be matched to the controller output or an appropriately rated interface driver. Each contact is specified at 5 A for 250 VAC or 30 VDC, subject to the connected load and switching conditions. Freewheeling diodes help suppress inductive voltage spikes during coil de-energization. Where a machine uses a 24 VDC control supply, the AE-16-024D-2-B-C provides sixteen DPDT channels with a different coil-voltage requirement.
The 16 Channel 12V Relay Module can organize numerous discrete control functions within a PLC cabinet or process automation panel. With sixteen relay positions, terminal identification, wire routing, and access for maintenance become important installation considerations. The board is listed for DIN rail or panel mounting. Applications requiring eight 12 VDC DPDT channels can use the AE-08-012D-2-B-C as a related configuration. When multiple channels energize simultaneously, the control supply must accommodate their combined coil current. Each external load circuit also requires protection appropriate to its electrical characteristics.