Agility AE-01-012D-2-B 12V 1 Channel Relay Module
Agility AE-01-012D-2-B is a single-channel Agility relay board designed for industrial control circuits operating with a 12 VDC relay coil. It incorporates an Omron G2R Series electromechanical relay with two changeover (DPDT) contacts, allowing two related switching circuits to operate from one control signal. Each contact is rated at 5 A for 250 VAC or 30 VDC under specified load conditions. Freewheeling diode protection helps suppress coil switching transients, while DIN rail or panel mounting supports control cabinet installation. This 12V 1 Channel Relay Module is suitable for PLC interfacing and auxiliary control applications. Agility relay board options include additional switching configurations.

| Brand | Agility |
| Product | Relay Board |
| Model Number | AE-01-012D-2-B |
Agility AE-01-012D-2-B Relay Board â Technical Overview
| Specification | Value |
|---|---|
| Relay Type | Electromechanical Relay |
| Relay Contact Type | Two Change Over (DPDT) |
| Relay Make | Omron G2R Series (Other make available on request) |
| Coil Voltage | 12 VDC |
| Number of Channels | 1 Channel |
| Contact Rating | 5A at 30VDC/250VAC |
| Input Interface | PLC / Control signal compatible |
| Mounting Type | DIN Rail / Panel Mount |
| Relay Coil Protection | Freewheeling Diode |
| Isolation | Electrical isolation between control circuit and load circuit |
| Application | PLC interface, automation control panels, machine control systems |
The Agility AE-01-012D-2-B relay board provides one independently controlled relay channel with two changeover (DPDT) contact sets for industrial automation applications. Its Omron G2R Series relay operates with a 12 VDC coil, allowing one control command to switch two mechanically linked contact paths. For example, one contact can operate an auxiliary control circuit while the second provides an associated status indication. Both contacts change together when the relay is energized, making this configuration suitable for applications requiring two related switching functions from a single control signal.
The relay contacts are specified at 5 A for 250 VAC or 30 VDC, subject to the connected load characteristics. The 12 VDC rating refers to the relay coil supply rather than the voltage of the switched circuits. Freewheeling diode protection helps suppress voltage transients during coil de-energization. For control systems operating with a 5 VDC relay supply, the AE-01-005D-2-B provides a single-channel DPDT configuration using an Omron G2R Series relay. The controller output must provide sufficient coil-driving current.
This Agility relay board supports DIN rail or panel mounting inside PLC cabinets, machine control panels and auxiliary switching enclosures. Electrical connections should identify the two common terminals and their normally open(NO) and normally closed(NC) contact paths. When only one changeover contact is required, the AE-01-005D-1-B offers a 5 VDC SPDT configuration using an Omron G2RL Series relay. The appropriate contact arrangement depends on the number of switching paths required and the available control voltage.