+91 98845 40315 | 99410 99014 info@powerswitchgears.com

Agility AE-04-024D-2-B-C 4 Channel Relay Board

Agility AE-04-024D-2-B-C is a four-channel Agility relay board designed for industrial control circuits requiring two changeover contacts per output. Its 24 VDC coils operate Omron G2R Series DPDT relays, giving each channel two mechanically linked contact poles. This arrangement allows one control command to switch a field circuit and a related auxiliary signal together. The contacts are rated at 5 A at 250 VAC or 30 VDC under applicable load conditions. Freewheeling diodes suppress coil switching transients, and the board supports DIN rail or panel mounting. This 4 Channel Relay Board is suitable for machine-control panels. Other Agility relay products cover additional industrial switching requirements.

BrandAgility
ProductRelay Board
Model NumberAE-04-024D-2-B-C

Agility AE-04-024D-2-B-C Relay Module – Technical Overview

SpecificationValue
Relay TypeElectromechanical Relay
Relay Contact TypeTwo Change Over (DPDT)
Relay MakeOmron G2R Series (Other make available on request)
Coil Voltage24 VDC
Number of Channels4 Channel Relay Module
Contact Rating5A at 30VDC/250VAC
Input InterfacePLC / Control signal compatible
Mounting TypeDIN Rail / Panel Mount
Relay Coil ProtectionFreewheeling Diode
IsolationElectrical isolation between control circuit and load circuit
ApplicationPLC interface, automation control panels, machine control systems

The Agility AE-04-024D-2-B-C relay board is an industrial relay module with four independently controlled 24 VDC coils and eight changeover contact poles. Each Omron G2R Series relay has two mechanically linked poles, so one command can operate a primary control path and an associated indication or permissive circuit. For example, a machine panel can use one pole to switch a suitably rated control input and the second to report the corresponding relay state. The four channels remain independently operated, but the two poles within any one channel always change together.

The 24 VDC designation applies to the relay coils, not necessarily to the switched field circuits. Each DPDT contact is listed at 5 A for 250 VAC or 30 VDC, subject to the load type and switching duty. PLC output current, diode polarity and the load's inrush characteristics should be checked during selection. The AE-04-024D-1-B-C provides four 24 VDC channels with SPDT contacts and Omron G5Q relays, making it a relevant option when only one changeover pole per command is required.

For equipment using a 5 VDC relay supply, the AE-04-005D-2-B-C offers four DPDT channels with a different coil voltage. On this Agility relay, freewheeling diodes help limit inductive transients when the coils are de-energized. DIN rail or panel mounting allows the module to be positioned with other control components, while clear terminal labeling distinguishes the eight contact poles from the four relay commands. Each connected circuit should have protection suited to its electrical load.