+91 98845 40315 | 99410 99014 info@powerswitchgears.com

Agility AE-08-012D-1-B-C 8 Channel 12V Relay Module

Agility AE-08-012D-1-B-C is an 8-channel Agility relay board designed for switching multiple field circuits through a 12 VDC control supply. The module incorporates Omron G2R Series electromechanical relays, each providing one changeover (SPDT) contact with normally open(NO) and normally closed(NC) connections. Its specified contact rating is 10 A at 250 VAC or 30 VDC, depending on the connected load. Freewheeling diodes help suppress coil switching transients, while DIN rail or panel mounting supports installation in automation cabinets. This 8 Channel 12V Relay Module is suitable for multi-output control applications. Agility relay board solutions cover additional industrial control and switching requirements.

BrandAgility
ProductRelay Board
Model NumberAE-08-012D-1-B-C

Agility AE-08-012D-1-B-C Relay Board – Technical Overview

SpecificationValue
Relay TypeElectromechanical Relay
Relay Contact TypeOne Change Over (SPDT)
Relay MakeOmron G2R Series (Other make available on request)
Coil Voltage12 VDC
Number of Channels8 Channel Relay Board
Contact Rating10 A at 250 VAC / 30 VDC
Input InterfacePLC / Control signal compatible
Mounting TypeDIN Rail / Panel Mount
Relay Coil ProtectionFreewheeling Diode
IsolationElectrical isolation between control circuit and load circuit
ApplicationPLC interface, automation control panels, machine control systems

The Agility AE-08-012D-1-B-C relay board provides eight independently operated switching channels for machine automation systems using 12 VDC relay coils. Each channel incorporates an Omron G2R Series relay with a single changeover (SPDT) contact. The normally open(NO) and normally closed(NC) terminals allow individual circuits to operate according to the required control logic. In industrial panels, the eight outputs can be assigned to separate contactor interfaces, machine-status indications, auxiliary control signals or other appropriately rated electrical devices.

The specified contact rating is 10 A at 250 VAC or 30 VDC under the applicable load conditions. The 12 VDC coil voltage determines relay actuation and should not be confused with the voltage carried by the switched contacts. Freewheeling diode protection helps limit inductive voltage transients when the coils are de-energized. For control systems operating with 5 VDC relay coils, the AE-08-005D-1-B-C provides eight SPDT channels using Omron G5Q Series relays. Controller output current, drive polarity and simultaneous coil operation must be considered when connecting either configuration.

This 8 Channel 12V Relay Module supports centralized switching arrangements in machine-control cabinets and process automation equipment. Its DIN rail or panel mounting options allow the relay connections to be organized alongside other control components. Clear channel identification and separation of control wiring from switched load circuits help simplify installation and maintenance. Where fewer outputs are required with the same 12 VDC coil supply, the AE-04-012D-1-B-C provides four SPDT channels using Omron G2R relays. The number of switching functions, available control voltage and electrical load characteristics determine the appropriate relay board configuration.