Agility AE-02-005D-1-B-C 2 Channel 5V Relay Module
Agility AE-02-005D-1-B-C is a two-channel Agility relay board designed to switch external circuits using compatible 5 VDC control signals. It incorporates Omron G2R Series electromechanical relays, each providing one changeover (SPDT) contact for independent switching. The contacts are specified at 10 A for 250 VAC or 30 VDC, subject to the electrical load conditions. Freewheeling diodes help suppress voltage spikes during coil de-energization, while DIN rail or panel mounting supports control cabinet installation. This 2 Channel 5V Relay Module is suitable for machine control, auxiliary switching and electronic controller interfaces. Agility relay board solutions include related industrial automation switching components.

| Brand | Agility |
| Product | Relay Board |
| Model Number | AE-02-005D-1-B-C |
Agility AE-02-005D-1-B-C Relay Board â Technical Overview
| Specification | Value |
|---|---|
| Relay Type | Electromechanical Relay |
| Relay Contact Type | One Change Over (SPDT) |
| Relay Make | OMRON G2R Series (Other make available on request) |
| Coil Voltage | 5 VDC |
| Number of Channels | 2 Channel Relay Board |
| Contact Rating | 10 A at 250 VAC / 30 VDC |
| Input Interface | PLC / Control signal compatible |
| Mounting Type | DIN Rail / Panel Mount |
| Relay Coil Protection | Freewheeling Diode |
| Isolation | Electrical isolation between control circuit and load circuit |
| Application | PLC interface modules, machine control panels, industrial automation switching |
The Agility AE-02-005D-1-B-C relay board provides two independently controlled switching channels for automation equipment operating with a compatible 5 VDC relay supply. Each channel incorporates an Omron G2R Series relay with a single changeover (SPDT) contact, allowing the connected circuit to use either normally open(NO) or normally closed(NC) switching. In machine control applications, the two relay outputs can be assigned to separate functions such as auxiliary contactor control, equipment status indication or alarm signaling. The relay contacts provide electrical separation between the coil circuit and the switched load circuit.
The 5 VDC specification refers to the relay coil voltage rather than the voltage applied to the switched contacts. Each contact is rated at 10 A for 250 VAC or 30 VDC under the specified switching conditions. The controller must provide sufficient coil-driving current, and the actual load characteristics should be considered before connecting inductive devices. Freewheeling diodes help limit coil turn-off transients. For applications requiring the same number of channels with a 12 VDC coil supply, the AE-02-012D-1-B-C provides two SPDT outputs using Omron G2RL Series relays.
This 2 Channel 5V Relay Module supports DIN rail or panel mounting for integration into industrial automation enclosures. Its two-channel configuration allows individual switching functions to remain identifiable without using additional relay positions. Applications requiring four independent 5 VDC relay outputs can use the AE-04-005D-1-B-C, which incorporates Omron G5Q Series relays with SPDT contacts. During installation, control-output capability, relay contact duty, terminal identification and appropriate load-side protection should be checked for each connected circuit.