+91 98845 40315 | 99410 99014 info@powerswitchgears.com

Agility AE-02-024D-2-B-C Double Channel Relay

Agility AE-02-024D-2-B-C is a 2 Channel Relay Module designed for interfacing PLC outputs with industrial control circuits using 24 VDC coils. It incorporates two Omron G2R Series electromechanical relays, each providing two changeover (DPDT) contact sets for switching related electrical circuits. The contacts are rated at 5 A for 250 VAC or 30 VDC under specified load conditions. Freewheeling diodes help suppress coil switching transients, while DIN rail or panel mounting supports control cabinet installation. This 2 Channel Relay Board provides four contact poles controlled through two independent relay channels. Agility relay board configurations include other channel counts and coil voltage options for automation applications.

BrandAgility
ProductRelay Board
Model NumberAE-02-024D-2-B-C

Agility AE-02-024D-2-B-C Relay Board – Technical Overview

SpecificationValue
Relay TypeElectromechanical Relay
Relay Contact TypeTwo Change Over (DPDT)
Relay MakeOmron G2R Series (Other make available on request)
Coil Voltage24 VDC
Number of Channels2 Channel Relay Module
Contact Rating5A at 30VDC/250VAC
Input InterfacePLC / Control signal compatible
Mounting TypeDIN Rail / Panel Mount
Relay Coil ProtectionFreewheeling Diode
IsolationElectrical isolation between control circuit and load circuit
ApplicationPLC interface, automation control panels, machine control systems

The Agility AE-02-024D-2-B-C relay board provides two independently controlled relay channels for industrial automation panels requiring paired contact switching. Each channel uses an Omron G2R Series DPDT relay, offering two changeover contact sets operated by a single 24 VDC coil. This arrangement allows one control command to operate two related circuits, such as a contactor interface and an auxiliary indication. The board has four changeover poles across two relay channels, but the paired contacts cannot be controlled independently. Its compact configuration is relevant to machine control panels where two separate commands require dual-contact operation.

The contacts are specified at 5 A for 250 VAC or 30 VDC, subject to the connected load and switching conditions. The 24 VDC specification applies to relay coil operation rather than the voltage present across the switched contacts. Freewheeling diode protection helps limit the inductive voltage generated during coil de-energization. For systems requiring a single relay channel with a 24 VDC coil and two changeover contacts, the AE-01-024D-2-B is a related configuration with fewer independent relay outputs.

This 2 Channel Relay Module supports PLC interfacing, auxiliary control switching, machine sequencing and appropriately rated field-device circuits. DIN rail or panel mounting allows installation within automation enclosures, while separate contact terminals provide flexibility in external circuit wiring. The controller output must supply the required coil current, and each switched load should be evaluated against its applicable contact rating. Where a 5 VDC relay supply is available instead of 24 VDC, the AE-02-005D-2-B-C provides two DPDT relay channels using Omron G2R Series relays. Coil voltage, output count and contact configuration determine the appropriate relay interface for an application.