Agility AE-01-024D-2-B Single Channel Relay Module
Agility AE-01-024D-2-B is a single-channel Agility relay board designed for industrial control circuits requiring two changeover contacts from one 24 VDC relay command. It incorporates an Omron G2R Series electromechanical relay with a DPDT contact configuration, allowing two separate switching paths to operate together. Each contact is rated at 5 A for 250 VAC or 30 VDC under specified load conditions. Freewheeling diode protection helps suppress coil switching transients, while DIN rail or panel mounting supports control cabinet installation. This Single Channel Relay Module is suitable for PLC output interfacing, auxiliary control and machine automation applications. Agility relay board options include other coil voltages and switching configurations.

| Brand | Agility |
| Product | Relay Board |
| Model Number | AE-01-024D-2-B |
Agility AE-01-024D-2-B Relay Board â Technical Overview
| Specification | Value |
|---|---|
| Relay Type | Electromechanical Relay |
| Relay Contact Type | Two Change Over (DPDT) |
| Relay Make | Omron G2R Series (Other make available on request) |
| Coil Voltage | 24 VDC |
| Number of Channels | 1 Channel |
| Contact Rating | 5A at 30VDC/250VAC |
| Input Interface | PLC / Control signal compatible |
| Mounting Type | DIN Rail / Panel Mount |
| Relay Coil Protection | Freewheeling Diode |
| Isolation | Electrical isolation between control circuit and load circuit |
| Application | PLC interface, automation control panels, machine control systems |
The Agility AE-01-024D-2-B relay board provides one independently operated relay channel with two changeover (DPDT) contact sets for industrial automation circuits. Its Omron G2R Series relay operates from a 24 VDC coil supply, allowing a compatible PLC output or control interface to change two contact paths with a single command. For example, one pole can operate an appropriately rated auxiliary control circuit while the second changes a related status indication. Both contact sets are mechanically linked, meaning they switch together rather than functioning as two independent relay channels.
Each contact is specified at 5 A for 250 VAC or 30 VDC under applicable load conditions. The 24 VDC specification refers to the relay coil, while the contact terminals can switch separately powered circuits within their electrical ratings. A freewheeling diode helps limit inductive voltage transients when the coil is de-energized. For installations using a 12 VDC control supply, the AE-01-012D-2-B provides a single-channel DPDT configuration with a different coil voltage. Coil current, drive polarity and switching duty should be considered when connecting either model.
This Single Channel Relay Module is suitable for machine control panels, PLC interface circuits and auxiliary switching applications requiring two linked contact paths. DIN rail or panel mounting allows integration into an industrial control enclosure without allocating space for a larger multi-channel assembly. Where two independently controlled 24 VDC DPDT relay channels are required, the AE-02-024D-2-B-C provides an additional relay command. The selected configuration should match the number of independent commands, available coil supply and electrical characteristics of the connected loads.