Agility AE-08-005D-2-B-C 8 Channel Relay 5V
Agility AE-08-005D-2-B-C is an 8-channel Agility relay board designed for switching multiple control circuits through 5 VDC relay coils. It incorporates Omron G2R Series electromechanical relays, each providing two changeover (DPDT) contact sets for associated switching functions. The board offers eight independently operated channels with sixteen contact poles arranged in mechanically linked pairs. Each contact is specified at 5 A for 250 VAC or 30 VDC, subject to load conditions. Freewheeling diodes suppress coil switching transients, while DIN rail or panel mounting supports industrial installation. The 8 Channel Relay 5V configuration supports multi-output automation interfaces. Agility relay board solutions include components for industrial control applications.

| Brand | Agility |
| Product | Relay Board |
| Model Number | AE-08-005D-2-B-C |
Agility AE-08-005D-2-B-C Relay Board â Technical Overview
| Specification | Value |
|---|---|
| Relay Type | Electromechanical Relay |
| Relay Contact Type | Two Change Over (DPDT) |
| Relay Make | Omron G2R Series (Other make available on request) |
| Coil Voltage | 5 VDC |
| Number of Channels | 8 Channel Relay Module |
| Contact Rating | 5A at 30VDC/250VAC |
| Input Interface | PLC / Control signal compatible |
| Mounting Type | DIN Rail / Panel Mount |
| Relay Coil Protection | Freewheeling Diode |
| Isolation | Electrical isolation between control circuit and load circuit |
| Application | PLC interface, automation control panels, machine control systems |
The Agility AE-08-005D-2-B-C relay board provides eight independently controlled switching channels for automation equipment requiring paired relay contacts. Each Omron G2R Series relay operates with a 5 VDC coil and includes two changeover (DPDT) contact sets. When a channel is energized, both contact poles change state together, allowing one control command to operate a field circuit and an associated indication or auxiliary signal. Although sixteen contact poles are available, the board provides eight separately controlled relay operations rather than sixteen independent outputs.
The relay contacts are specified at 5 A for 250 VAC or 30 VDC under the applicable load conditions. This rating refers to the switching contacts and should not be confused with the 5 VDC coil supply. Electronic controllers must provide suitable relay drive current, particularly when several channels operate simultaneously. Freewheeling diode protection helps suppress coil turn-off transients, while the polarity of the driving circuit must be considered. For installations requiring sixteen independently controlled DPDT channels, the AE-16-005D-2-B-C provides a higher channel-count configuration using Omron G2RL Series relays.
This 8 Channel 5V Relay Module can be integrated into machine automation cabinets, PLC interface assemblies and multi-function control panels where separate commands require paired contact operations. DIN rail or panel mounting allows the relay interface to be positioned alongside other control components. Terminal numbering, contact-pair identification and separation between control wiring and switched field circuits are important during installation. For applications requiring only four independently controlled DPDT relay channels, the AE-04-005D-2-B-C offers a smaller 5 VDC configuration. Each external circuit should be evaluated for load current, inrush characteristics and the required switching sequence.