+91 98845 40315 | 99410 99014 info@powerswitchgears.com

Panasonic CX-441-P PNP Adjustable Range Reflective Photoelectric Sensor

Panasonic CX-441-P is a PNP adjustable range reflective photoelectric sensor developed for short-distance object detection in industrial automation equipment. Part of the CX-400 Ver.2 Series, this small-spot sensor uses a red LED with a 650 nm peak emission wavelength and produces an approximately Ø2 mm spot at a 50 mm distance. Its sensing range extends from 2 to 50 mm with white non-glossy paper, while the adjustable distance setting covers 20 to 50 mm. The CX-441-P features a PNP open-collector transistor output with a maximum source current of 100 mA. It also supports selectable Detection-ON/Detection-OFF operation, BGS/FGS sensing functions, and a 1 ms or less response time.

BrandPanasonic
DetailsAdjustable range reflective(Small spot)
Product TypeAdjustable Range Reflective Photoelectric Sensor
Product NameCompact Photoelectric Sensor CX-400 Ver.2
Product NumberCX-441-P

Panasonic CX-441-P Photoelectric Sensor - Technical Specifications

SpecificationValue
Adjustable range20 to 50 mm (0.787 to 1.969 in)
Sensing Range2 to 50 mm (0.079 to 1.969 in)
Hysteresis2% or less of operation distance
RepeatabilityAlong sensing axis: 1 mm or less; perpendicular: 0.2 mm or less
Supply Voltage12 to 24 V DC ±10%, Ripple P-P 10% or less
Current Consumption20 mA or less
OutputPNP open-collector transistor
Maximum sink current100 mA
Output operationSwitchable either Detection-ON or Detection-OFF
Response Time1 ms or less
Distance adjuster5-turn mechanical adjuster
Sensing modeBGS / FGS functions switchable with wiring of sensing mode selection input
Automatic interference prevention functionIncorporated
ProtectionIP67 (IEC)
Ambient temperature−25 to +55°C
Emitting element (modulated)Red LED
Peak emission wavelength650 nm
Spot diameterØ2 mm (Ø0.079 in) approx. at 50 mm distance
Cable0.2 mm² 4-core cabtyre cable, 2 m (6.562 ft) long

The Panasonic CX-441-P PNP photoelectric sensor is suitable for detecting small workpieces, checking component positions, and monitoring part presence in automated assembly and packaging equipment. Its PNP open-collector transistor output provides a sourcing signal for compatible PLC input circuits, while the 5-turn mechanical distance adjuster helps define the required detection position. Background suppression (BGS) and foreground suppression (FGS) functions can be selected through the sensing mode input, allowing the detection behaviour to be configured according to the target and surrounding surfaces. The approximately Ø2 mm red LED spot at a 50 mm distance helps establish a focused sensing area. This model also incorporates automatic interference prevention, short-circuit protection, and an IP67-rated enclosure. Engineers should verify sensing performance with the actual target because object material, colour, and mounting conditions can influence detection.